Auto-Bounce relies on a small set of custom Logic Pro key commands to control the bounce process. If these aren’t set up correctly, Auto-Bounce will not function as expected.
Start Here
Before doing anything else, please read the README FIRST document included in your Auto-Bounce folder. It contains the step-by-step setup instructions you’ll need. Most issues we see come from skipping this step.
Quick Setup
Open Logic Pro and go to Logic Pro > Key Commands > Edit.
Import the Auto-Bounce key command file included in your installation.
Verify that each Auto-Bounce command is properly assigned and functioning by testing them manually in Logic.
Video Walkthrough
? Watch the Quick Setup Guide here: Auto-Bounce Setup Guide on YouTube.
✅ Tip: If Auto-Bounce isn’t behaving correctly, the first thing to check is your key commands. Double-check them against the README FIRST and you’ll usually find the solution.
3
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article